|The KL-1 consists of a sophisticated and sturdy Main Unit and a Desk Top
Controller with five meters (HV, IP, IG, FWD, and REF). The LCD displays
BAND and ANTENNA CHANNEL allowing you continuous monitoring of the amplifiers.
The 7 meter (23') Remote Control Cable allows for remote installation of the Main Unit, providing you a separation with the heat and noise associated with the Main Unit.
|Preset tuning makes it easy to QSY quickly from one band to another. You can preset up to 14 frequencies in ham bands . After you set channels, QSY is so easy and quick. You can move up and down between adjacent bands in less than a second. Maximum waiting time to move from 160m to 10m is 30 seconds. KL-1 should help your operation without stress. You can Preset up to 14 frequencies in Ham bands. Preset tuning provides quick frequency changes. Adjacent band changes are less than a second. Maximum time between 160m to 10m is 30 seconds.|
|RS232C||SteppIR interface||Antenna Switch|
|You can connect KL-1 with your transceiver via a serial interface.
Verified compatible radios.
[YAESU] FTDX-9000,FTDX-5000,FT-2000, etc.
[ICOM] IC-7800,IC-7700,IC-760, etc.
[KENWOOD] TS-950,TS-2000,TS-590, etc.
|KL-1 has a data output connector to send your transceiver frequency data directly to the SteppIR.
Remote Antenna Switch(option)6 way antenna
switch coodinating with KL-1Accessary: 2m control cable
Power Rating : 5KW
|The USB port on the Desk Top Controller provides computer interfacing.
|Directional Through-line PEP Wattmeter||Control board in the RF unit|
|5KW Directional Through-line Wattmeter is
equipped. You can measure and monitor the
PEP output power.
2 power meters, FWD and REF provide a comfortable and reassuring operation.
PEP circuit board
PEP circuit boord
Input tuning matrix circuit and transmit/receive control circuit
|KL-1 Product Specifications|
|Power tube||3CX3000A7||Spurious emissions||Less than -50dB|
|1.8〜2.0MHz , 3.5〜4.0MHz , 7.0〜7.3MHｚ
(10〜10.15MHｚ) , 14.0〜14.35MHz , 18.068〜18.168MHｚ
21.0〜21.45MHｚ , 24.89〜24.99MHｚ , 28.0〜29.7MHｚ
14 presettable channels.
2 channels for 3.5, 7, 14 ,21 and 28MHz band.
1 channel for 1.8, 10, 18 and 24MHz band.
|input connector||50Ω Unbalanced, BNC|
|Output connector||50Ω Unbalanced, SO239|
|Operating temp.||0℃〜+40℃ (32°F 〜 104°F)|
|Control cable||7m(23') *optional 10m(32'), 20m(65')|
|Mode||CW, SSB, Digital||Dimension
478mmW X 800mm H X 564mmD without caster hight.
(18"W X31"H X22"D)
320mmW X107mmH X167.5mmD case size
(12"W X4"H X6"D)
|AC input||200 , 220 , 230 , 240VAC
Approx. 40Amps at 230VAC