KOHJINSHA
KOHJINSHA TOP > Super Versa
トップページ Versa KA1-Lite KA1DP KP-1 OM Power KL-1


 Latice boom is employed to hold and support  Super Versa AEUs and elements
The pipe attached vertically in the center of the boom can be used to hold additional mast.(see the left diagram) You may want to have another antenna like rotaly dipole on top.
An example in which a pipe was set up in a lattice boom and a CD 78 jr was installed The pipe attached vertically in the center of the boom can be used to hold additional mast.(see the left diagram) You may want to have another antenna like rotaly dipole on top.

The view from the antenna. (Picture by Jin, JF1IST)

Model
KA1-211X
KA1-408X
KA1-411X
  Production discontinued due to difficulty in boom procurement Production discontinued due to difficulty in boom procurement Production discontinued due to difficulty in boom procurement
Gain/Size KA-1 211X Gain table KA-1 408X Gain table KA-1 411X Element placement
Frequency Range 14-50 7-50 7-50
Element数 11 Elements 8 Elements 11 Elements
Number of Elements
for Each Band
14/18MHz 21/24/28MHz 50MHz 7/10MHz 14/18/21/24
/28MHz
50MHz 7/10MHz 14/18MHz 21/24/28MHz 50MHz
7 9 15 4 7 10 5 7 9 15
Power Rating 5kW/CW・10kWSSB 5kW/CW・10kWSSB 5kW/CW・10kWSSB
Longest Element(m) 10.73 15.1 15.1
  Φ38 Φ45 Φ45
Boom Length(m) 20 15 20
Turning Radius(m) 11.35 10.65 12.54
Weight(kg) 193 155 210
Wind pressure area(u) 3.6 3.1 3.9
Wind pressure area fit mast The mast recomended for Super Versa.(Weight 66lb(30Kg))

★All models are equipped with high power rating and high performance balun. (PL259 connector)
★Wind rating : 100MPH(45m/s)
 

For All Models
(Antenna parts & Accessories)
All antenna parts
Controller Adapter/1 Junction Box/ A set of cables to connect AEUs with Junction Box
Tranceiver Interface/Antenna Protection Circuit / Assembly Manual/ Operation Manual

 
Contact us
About us